Amcrest General 1080P(V2) Mini 1U Series, Руководство пользователя

Страница: 19 / 188

10
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for
the first time, please refer to this part first.
2.1 Front Panel
2.1.1 General 720P(V2) /General 1080P(V2) Mini 1U Series
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
SN
Icon Name Function
1 USB port
To connect USB storage device, USB mouse,
etc.
2 Alarm Alarm indicator light
When an alarm occurs, the light becomes red to
alert you.
3 REC
Record indicator
light
When the DVR is recording, the light turns red to
alert you
4 HDD
HDD abnormal
indicator light
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
5 NET
Network abnormal
indicator light
Network error occurs or there is no network
connection, the light becomes red to alert you.
6 ACT
Remote control
indicator light
When the DVR receives a signal from the
remote, the light will blink.
7 POWER Power indicator
When DVR is on, the light is on.
8 IR IR Receiver
It is to receive the signal from the remote control.
9 ESC ESC
Go to previous menu, or cancel current
operation.
When playback, click it to restore real-time
monitor mode.
10 FN Assist
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text
control, press it for 1.5seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and
direction keys to assist the setup.