AMCI SMD23E2 Series, Руководство пользователя

Страница: 104 / 134

S
ET THE
IP A
DDRESS AND
P
ROTOCOL
SMD23E2 and SMD24E2 User Manual
ADVANCED MICRO CONTROLS INC.
104
2.2b Use the Embedded Web Server (continued)
2.2b.3 Network Setup Page (continued)
5) If the values are accepted, the following pages will be displayed while the data is being written to the unit.
Wait for the pop up window to appear before cycling power to the SMD23E2 or SMD24E2.
Cycling power before this window appears may corrupt the non-volatile memory of the unit.
The SMD23E2 or SMD24E2 unit will also flash its Network Status LED red to indicate that
power must be cycled.
Figure T2.3 Write Configuration to Flash Memory Pages
6) Once instructed to, cycle power to the unit. You can now enter the new IP address into the address bar of
your web browser to reconnect with the SMD23E2 or SMD24E2.
Task Complete
CHANGES TO
ONCE THE WRITE
IS COMPLETED