Ambu aScope BronchoSampler, Инструкция по эксплуатации

Страница: 8 / 166

1. If suction is deemed relevant, turn the flow switch clockwise to align it vertically and pointing upwards,
and press the suction button on the aScope 4 Broncho. When suction is complete, turn the flow regulator
counter-clockwise towards the sample container, and align it horizontally.
2. Remove the sample container by pressing the flip top, and pull the sample container from the sampler bridge.
7
3. Close the sample container by pressing the sample container lid towards the sample container interface and
engage the click-lock. Once the click-lock is engaged, do not re-open the lid.
8
4.3. Post Procedure
1. If deemed relevant, detach the sampler bridge from the aScope 4 Broncho by disengaging the attachment lock,
and pull the sampler bridge off the aScope 4 Broncho. Disengage suction by pulling the suction tube off the
sampler bridge.
2. If deemed relevant, the sample can be accessed by unscrewing the sample container glass counter-clockwise.
It is recommended to handle contaminated substances in accordance with local guidelines.
9
3. Transportation and handling of sample container must be performed in accordance with local guidelines for
transportation and handling of hazardous material.
Final steps
aScope BronchoSampler™ is a single use device. aScope BronchoSampler™ is considered infected after use and
must be disposed in accordance with local guidelines for collection of infected medical devices.
5. Technical Product Specifications
5.1. Standards Applied
The aScope BronchoSampler™ function conforms with:
- ISO 8600-1: Endoscopes - Medical endoscopes and endotherapy devices - Part 1: General requirements
-
EN 14254: In Vitro Diagnostic medical devices – Single-use receptacles for the collection of specimens, other
than blood, from humans
5.2. aScope BronchoSampler™ Specifications
Suction Connector
1
Specification
Connecting tube with female interface. ID = Ø7 ± 1 mm
Connecting tube with male interface.
Applicable when suction adapter is used. OD = Ø7 ± 1 mm
1. Please check for compatibility with suction tubing before use
Sample Container Specification
Sample Container volume 30 ml
Storage and transportation Specification
Storage and transportation temperature 10-40°C (50-104°F)
Operating environment Specification
Temperature 10 - 40°C (50-104°F)
Sterilisation Specification
Method of sterilisation ETO
8