Ambir ImageScan Pro 930u, Руководство пользователя

Страница: 39 / 46

39
C
ALIBRATING THE
S
CANNER
Calibrate the scanner if colors appear in areas that should be white, or if
colors of the scanned image and of the original vary a lot. Calibration allows
you to adjust and compensate for variations that can occur in the optical
component over time.
The following describes how to calibrate the scanner:
1. Your scanner came packaged with a special sheet with symbols printed
on it called a Calibration Sheet. The Calibration Sheet is marked with an
arrow on either edge at both sides and is used specifically for Ambir
ImageScan Pro 940u calibration.
2. Insert the special Calibration Sheet into the ADF of the scanner, with an
arrow pointing toward the scanner's front buttons.
Attention
Please insert the special calibration sheet
included with the scanner. As an option, you
may also use any plain white sheet of letter
(8.5” x 11”) -sized paper instead; however,
the calibration effect may not be as precise
as when the special calibration sheet is used.
3. Click Start > All Programs > Ambir ImageScan Pro 940u > Calibration
Wizard .
4. Click Next from the Calibration Wizard that pops up and then click
Calibrate Now... .
5. Click on the Start button to begin the calibration process.
6. The scanner pulls the calibration sheet through the scanner, which
completes this scanner calibration. After the calibration is complete,
click
OK and then click Finish .