Ambir ImageScan Pro 930u, Руководство пользователя

Страница: 21 / 46

21
However, don’t use the ADF to scan any of the following documents:

Paper lighter than 14 lb. (50 g/m
2
) or heavier than 28 lb. (105 g/m
2
)

Paper with clips or staples attached

Paper with inconsistent thickness, e.g., envelopes

Paper with wrinkles, curls, folds, or tears

Paper with an odd (non-rectangular) shape

Tracing paper

Carbon paper, pressure sensitive paper, carbonless paper

Items other than paper, e.g., cloth, metal foil.
Attention

DO NOT use the ADF to scan
photographs or valuable document
originals; wrinkles or other damages can
result if paper feeds improperly.

DO NOT place paper with wet ink or
correction fluid into the ADF. Wait
enough time to allow to dry before
scanning.
Loosening Documents
Before loading a stack of documents into the ADF, loosen them as follows:
1. Fan the documents so that no two pages are sticking together.
2. Hold the documents upside down with both hands, and then gently
push them onto a flat surface to align the edges of all documents.
This will allow documents being fed into the ADF one at a time and prevent
paper-feeding errors.
P
LACING
D
OCUMENTS
1.
Load the documents, headfirst and face down, toward the center of the
ADF paper chute and all the way into the ADF until touching the bottom.