10
Step 2. Connecting the Scanner to Your Computer
Attention
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
1. Plug the AC adapter into the scanner’s power receptor
.
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port
at the rear of the
scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your computer.
5. If you plan to connect your scanner to a USB hub
, make sure that the hub is connected
to the USB port in your computer. Next, connect the scanner to the USB hub.
Attention
Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
3
The USB hub is not included with the scanner.
