Ambient ASHP-23, Инструкция по установке и эксплуатации

Страница: 30 / 38

Page 30 of 38
Quick Start Procedure
Hydronic Heat Pump Units
✓
Press the TARGET TEMP button
The Settings screen will now be displayed
✓
Press Enter button and the curser will now be flashing
on
Mode: OFF
✓
Press the UP or DOWN arrows to select HEAT ONLY,
COOL ONLY or OFF
✓
Press ENTER when desired mode is flashing
✓
Set Heating Water Target Temperature using the UP or
DOWN arrows then press ENTER
✓
Set Cooling Water Target Temperature using UP or
DOWN arrows and then press ENTER
✓
Press RETURN button to the MAIN SCREEN
Heat pump unit should now start to run on selected
mode
✓
Keep an eye on the System Supply and Return Water
Temperatures
✓
Check system pumping flow rates and proceed to
bleed air from all air bleed points on the hydronic
system (Example. Radiators, manifolds, pumps, tanks
and high points)
✓
Run and check system operation
✓
Full System Operation Real Time Date can be viewed
by pressing the DOWN arrow button from the MAIN
SCREEN
– Keep pressing the DOWN arrow to view all the
heat pump operation screens