If the remote does not update, please reference the troubleshooting guide
in
Section 7
.
2.2.1
Display Console Layout
Note:
The following illustration shows the full segments of the LCD for
description purposes only and will not appear like this during normal
operation.
Figure 2
1. Channel 1,2,3,4,5,6,7,8, indictor 6. Indoor Relative Humidity (%)
2. Scroll mode (CH 1-8) 7. Indoor Temperature
3. Transmitter low battery indicator 8. Outdoor Relative Humidity (%)
4. Min/Max Record mode 9. Outdoor Temperature
5. Min/Max reset for 24h 10. Temperature units (°F or °C)
2.2.2
Sensor Operation Verificatio
n
Verify the indoor and outdoor humidity match closely with the console and
sensor array in the same location (about 5 to 10’ apart). The sensors
should be within 10% (the accuracy is ± 5%). Allow about 30 minutes for
both sensors to stabilize. The humidity can be adjusted or calibrated later
to match each other a known source.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 5
2
1
3
5
6
8
9
10
4
6
7
