2. Getting Started
The WS23C (console only) works perfectly fine as a standalone unit (no
sensors required) if you simply want to monitor indoor temperature and
humidity. The WS23C is also sold without any remote sensors so that
you can add additional consoles to your system.
Some of this manual is devoted to wireless communication to one or
remote sensors. You can ignore this information if you purchased the
console as a stand-alone system.
Note: If you own a remote sensor,
the power up sequence must
be performed in the order shown in this section (insert batteries in the
remote transmitter(s) first, Display Console second).
2.1 Parts List
2.2 Display Console Set Up
1. Move the remote thermo-hygrometer(s) about 5 to 10’ away from
the display console (if the sensor is too close, it may not be received by
the display console). If you have more than one thermo-hygrometer,
make sure they are all powered up and transmitting on different channels.
2. Remove the battery door on the back of the display, as shown in
Figure 1.
Insert four AAA (alkaline or lithium, avoid rechargeable)
batteries in the back of the display console.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 3
QTY Item
Display Console
Frame Dimensions (LxHxW): 6 x 3.25 x 1 in
LCD Dimensions (LxW): 4.5 x 2.5”
LCD Segment Height: 1 inch
1
User Manual
1
WS23C
Add as many display consoles as you
like to your existing system. For
example, you can have one remote
sensor display temperature and place a
display console in every room.
