12
www.ambient.de
SYNC MENU
The SYNC menu lets you set the sync signal
format, type and rate. Select the different settings
by pushing the config switch. Navigate by toggling
the config switch left or right.
“PPF” – selects a “pulse per frame” signal. This is
used to trigger certain video cameras.
The PPF signal is put out on pin 3 of the Lemo/TC
socket and on pin 3 of the Lemo/ACN socket. Only
the output on the Lemo/ACN socket Is a “timer”
output, on Lemo/TC there is a jitter of up to 2 ms.
For the PPF signal, rate (single, double, quad) can
be selected, and whether it shall be a “high-low”
or low-high transition.
Pushing the config switch selects. If any changes
have been selected, you will be asked to confirm.
Pushing the config switch while “old” is
highlighted discards the changes and returns to
the main menu.
Pushing the config switch while “new” is
highlighted will set the sync signal to the selected format.
“OFF” – deactivates any sync signal. Use this if time code only is required.
