13
www.ambient.de
TC MENU
Enter the TC menu to adjust the time code frame
rate, MIDI time code (MTC) functions and time
code output level for pin 5 Lemo/TC.
TC > FPS
Select FPS for adjusting the frame rate.
Adjust by
toggling the config switch left/right, push to select new
frame rate:
Available rates:
23.976, 24, 25, 29.97, 30, 29.97D, 30D
fps (D = drop frame)
If settings are changed, confirmation is required:
Pushing the config switch while “old” is highlighted,
discards the changes and returns to the main menu.
Pushing the config switch while “new” is highlighted
will set the time code signal to the selected rate and
resets the time code if changing between integer and
non-integer rates (a.k.a. PAL / NTSC Area),
TC > MTC
Select MTC to control the Midi Time Code options:
MTCout: this is the default mode. The ACN-TL always
puts out MTC, unless the USB port is set to COM (see
SYS > Config > Lemo/ACN > USB)
The Lemo/ACN Socket switches to USB whenever a 5
Volt USB power is recognized.
MIDI>LTC: MTC received through USB on Lemo/ACN
will be converted into LTC and put out on both Lemo
sockets, pin 5.
LTC>MIDI: LTC received on Lemo/TC pin 2 will be
converted and put out as MTC via USB.
