3. Scanning the file system
4. Initialize the receiver
5. Finished booting
Because the Ethernet cable is not connected on the first boot, the “Lan” and “Inet” boxes will
be clear and relay 6 indicator will be dark.
At this point, setup the
setting. Once the Ethernet settings are
. The receiver should now be setup correctly and The
“Lan,” and “Inet” boxes should be black and all the relay indicator boxes should be clear.
1. The “Lan” box means the receiver is communicating with your local network.
2. The “Inet” box means the receiver is communicating with the uplink server through
the Internet.
3. With no audio playing the “St-1” and “St-2” should be clear.
4. All of the “I/O” boxes on the top line should be clear (no alarms).
Rev. 1 – Firmware version 2.03
8
©
2012
Relay 6 active
No LAN or Internet connection to the server
WARNING
To preserve the AMR-100-I status logs, always use the reset switch to reset the
receiver. Never unplug the receiver to reboot it.