Amb-OS Media AMR-100I Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 52

Amb-OS Media AMR-100I Скачать руководство пользователя страница 27

Settings Menu

IP Address Submenu

MAC XXXXXXXXXXXX (unique to each receiver and cannot

be changed)

*Alarm: ON (default – assigned to Relay #6)

The alarm closes on the following conditions:

1. Loss of Ethernet connectivity to the network
2. Loss of connection the server

To change the setting, follow this procedure.

1. Press [ENTER] – ON is highlighted as the default
2. Press [ENTER] to change it to OFF
3. Press [BACK] to return to the IP Address submenu

If you are not going to connect your receiver to your internal
network or to the Internet, turn the alarm setting to OFF.

*DHCP: YES

1. Press [ENTER] – YES is highlighted as the default
2. Press [ENTER] to change to NO
3. Press [BACK] to return to the IP Address submenu

*IP Addr: XXX.XXX.XXX.XXX (See

IP Address Change

section) –

Remember 1 and 2 digit subnet addresses have

leading 0’s (.002. for .2. and .030. for .30).

If you use a manual (static) IP address (DHCP = No), you

must enter a subnet mask and default gateway to be
able to exit the menu.

1. Press [ENTER] – first digit is selected
2. Press [UP] or [DOWN] to change the digit to the desired

value

3. Press [ENTER] when have the number you want (it will

move to the next digit)

4. Press [UP] or [DOWN] to select next digit
5. Press [BACK] to go back to the previous digit to correct

it, if necessary

6. Do this for all 12 digits, then press [ENTER] to save and

return to the IP Address submenu

*Gateway: 192.168.1.1 (This is your network’s Internet gateway

and provided by your network administrator. This number is
for illustration purposes only.) –

Remember 1 and 2 digit

subnet addresses have leading 0’s (.002. for .2. and .030. for
.30).

1. Press [ENTER] – First digit is selected
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] when have the number you want (it will move to the next digit)
4. Press [UP] or [DOWN] to select next digit
5. Press [BACK] to go back to the previous digit to correct it, if necessary
6. Do this for all 12 digits, then press [ENTER] to save and return to the IP Address

submenu

Rev. 1 – Firmware version 2.03

27

©

2012

LdSrvr1

LdPort1

RpPort3

RpSrvr1

RpSrvr4

RpPort2

RpSrvr3

MAC

Alarm

DHCP

IP Addr

Gateway

Netmask

RpPort1

RpSrvr2

Web Port

Cmd Port

Cmd Addr

LdSrvr3

IP Addr

LdPort4

RpPort4

LdSrvr4

LdPort3

LdPort2

LdSrvrt2

LdPort2

«
...
25
26
27
28
29
...
»

Содержание AMR-100I





















































Отзывы:

Нет отзывов