Amazone ZG-B 8200 Truck Скачать руководство пользователя

Страница: 55 / 98

Adjustments

ZG-B

BAG0170.2 02.21

Adjustments

When performing any adjustment work on the machine, observe the

information in the following chapters

•

"Warning symbols and other labels on the machine" from page

16 and

•

"Safety information for the operator" from page 23.

Observing this information is important for your safety.

WARNING
Danger of, shearing, cutting, entrapment, entanglement, being

drawn in, caught or struck during all adjustment work on the

machine

•

due to unintentional contact with moving operating ele-

ments (spreading vanes of rotating spreading discs).

•

due to tractor and connected machine unintentionally start-

ing up or rolling away.

•

Secure the vehicle and the machine against unintentional start-

up and rolling, before adjusting the machine. See page

Fehler!

Textmarke nicht definiert.

•

Only touch moving operating elements (rotating spreading discs)

when they have come to a complete standstill.

Please note that the individual spreading properties of the spread

material have a significant influence on the lateral distribution and

spread rate. For this reason, the listed setting values should only be

considered as a reference.
The spreading properties depend on the following factors:

•

The fluctuations in the physical data (specific weight, grain

size, frictional resistance, cw value, etc.) within the same type

and brand

•

The different properties of the spread material due to weather

factors and/or storage conditions.

As a result of this, we cannot guarantee that your spreading material,

even with the same name and from the same manufacturer, has the

same spreading properties as the listed spreading material. The spec-

ified setting recommendations for the lateral distribution are based

exclusively on the weight distribution and not on the nutrient distribu-

tion (this applies particularly for mixed fertilisers) or the active sub-

stance distribution (e.g., for slug pellets or lime). Claims for damages

not caused by the centrifugal spreader itself are excluded.

Содержание ZG-B 8200 Truck



































































































Результаты поиска

Содержание ZG-B 8200 Truck

Отзывы:

Похожие инструкции для ZG-B 8200 Truck

Бренды по названию

Популярные бренды

Amazone ZG-B 8200 Truck, Руководство по эксплуатации

Результаты поиска

Содержание ZG-B 8200 Truck

Отзывы:

Похожие инструкции для ZG-B 8200 Truck

Бренды по названию

Популярные бренды