Amazone ZG-B 8200 Truck, Руководство по эксплуатации

Страница: 60 / 98

Adjustments
60
ZG- B
BAG0170.2 02.21
6.2 Spread rate control mineral fertiliser calibration
Check the adjusted shutter slide positions by carrying out a calibration
test using the calibration device (option).
Spread rate control must be carried out:
•
each time fertiliser is changed
• when spread rate is changed
•
when working width is changed
6.2.1 Arrangement for the spread rate check
1. Adjust the shutter slide according to the
setting chart.
2. Unscrew the hex. bolt.
3. Remove the spreading disc.
4. Screw in the hex. bolt again.
5. Remove the funnel chute.
6. Hang the calibration device (Fig. 36/1) in
the pockets (Fig. 36/2) and secure using
clip pins (Fig. 36/3) sichern.
7. Hang each one calibration bucket (Fig.
36/4) on the hook underneath the outlets.
After a test run which delivers the fertiliser in
relation to the shutter slide position to the end of
the belt, the fertiliser can be collected during a
predetermined test distance (forward distance)
Fig. 36
ZG-B Driv
e : See operation manual
Software AMABUS, chapter fertiliser
calibration.