User information
Groundkeeper GH / HH SMARTCUT BAF0005.4 06.21
7
1
User information
The "User information" section supplies information on using the op-
erating manual.
1.1
Purpose of the document
This operating manual
•
Describes the operation and maintenance of the machine.
•
Provides important information on safe and efficient handling of
the machine.
•
Is a component part of the machine and should always be kept
with the machine or the traction vehicle.
•
Keep it in a safe place for future use.
1.2
Locations in the operating manual
All the directions specified in the operating manual are always viewed
in the direction of travel.
1.3
Diagrams used
Instructions for action and reactions
Tasks to be carried out by the owner/operator appear in the form of
numbered handling instructions. Observe the sequence of the han-
dling instructions given. The result of the relevant handling instruction
is indicated by an arrow as necessary.
Example:
1. Instruction for action 1
→ Reaction of the machine to instruction for action 1
2. Instruction for action 2
Lists
Lists without a mandatory sequence a presented as a list with bullet
points.
Example:
•
Point 1
•
Point 2
Item numbers in diagrams
Digits shown in round brackets refer to the position number in the
illustration. The first digit refers to the illustration, the second refers to
the position number in the illustration. Example: (Fig. 3/6)
•
Figure 3
•
Item 6
