52
Groundkeeper GH / HH SMARTCUT BAF0005.4 06.21
7
Adjusting the cutting height
The height of the guide wheels can be adjusted by removing the
spacer sleeves and reinserting them in a different location (Fig. 7-1).
To do this, the machine must be raised using the tractor's hydraulic
system. The guide wheel retractor must then be removed and the
sleeves positioned according to the required height. The guide wheel
retractor is then hung back in and secured.
The height of the rear cage roller is adjusted as follows:
•
Raise the machine.
•
Loosen the clamping screw (fig. 7-2),
