Attaching and removing the machine at the tractor's rear three-
point system
Groundkeeper GH / HH SMARTCUT BAF0005.4 06.21
31
5
Attaching and removing the machine at the tractor's rear
three-point system
Before attaching the machine to the tractor, make sure that the
lateral setting of the three-point system on the machine matches
the mount category of the tractor (CAT I or II).
•
Release the fastener on the lower link sockets (Fig. 5-1),
•
Move the lower link sockets to the required position and fasten in
place with 4 screws each.
•
Adjust the lower 3-point linkage to the tractor, so that the
tractor tire is no tin contact with the machine front castor
wheels.
