manualshive.com logo in svg

Amazone GHS 1500 Drive SmartCut, Оригинальное руководство по эксплуатации, Страница: 90 / 138

Поделиться
Скачать
Amazone GHS 1500 Drive SmartCut Скачать руководство пользователя страница 90

 

IMPORTANT 

 

Machine damage due to incorrect blade
selection or incorrect blade installation

Imbalance on the rotor and machine
vibrations

Select the blades appropriately for the
application area.
Always equip the rotor with the specified
number of blades.
Install the blades in the proper installation
position.
Pay attention to the wear limits.
Replace worn blades.

 

7.

Swivel the blade 

1

 towards the pointed area 

2

of the mount.

8.

Turn the blade by 90° and take it out with the
open side on the pointed area.

9.

Push in a different or new blade with the open
side on the pointed area and swivel the blade on
the mount.

CMS-I-00002324

10. Hold the rotor protective cover 

1

 by the holding

strap 

2

 and close it.

11. Press the rotor protective cover into the locking

mechanism.

The locking mechanism engages audibly.

12. Check that the rotor protective cover is properly

locked.

CMS-I-00003345

6 | Preparing the machine

Preparing the implement for operation 

MG6212-EN-II | C.1 | 12.04.2021

84

Содержание GHS 1500 Drive SmartCut











































































































































Отзывы:

Нет отзывов