3.
Lower the implement at the front with the cutting
deck
1
using the tractor controls until the cage
roller
2
and the support wheels
3
are resting
on the grass.
4.
Move the drawbar and cutting deck hydraulic
systems into float position.
The cage roller and the support wheels guide the
cutting deck over the ground.
The rear wheels only have a supporting function
and compensate for ground undulations between
the right and left wheel.
1
2
3
CMS-I-00003366
5.
Start the PTO shaft drive on the tractor.
6.
Pay attention to the maximum drive speed.
CMS-I-00000433
NOTE
The sensitivity of the grass collector fill level
indicator depends on the mowed material.
7.
Check the fill level of the grass collector on the
display
1
.
8.
As long as the pointer is in the lower position
2
,
mowed material can still be collected.
9.
When the pointer
3
starts to move,
the grass collector should be emptied.
10.
If the pointer is in the upper position
4
,
the grass collector must be emptied.
CMS-I-00003365
7 | Using the machine
Using the implement with Standard hydraulic system
MG6212-EN-II | C.1 | 12.04.2021
99
