Amazone Centaya 3000 Super 1600, Руководство по эксплуатации

Страница: 31 / 230

General safety instructions
Centaya Super BAH0092-3 01.19
31

Always properly fasten the front or rear weights to the intended
fastening points.

Comply with the maximum payload of the mounted/towed im-
plement and the permissible axle and drawbar loads of the trac-
tor.

The tractor must guarantee the prescribed brake delay for the
loaded vehicle combination (tractor plus mounted/towed imple-
ment).

Check the brake power before moving off.

When turning corners with the mounted or towed implement,
take the wide sweep and centrifugal mass of the implement into
account.

Before transporting the implement, ensure sufficient side locking
of the tractor lower links if the implement is attached to the three-
point hydraulic system or lower links of the tractor.

Before road transport, move all the swivel implement parts to the
transport position.

Before road transport, secure all the swivel implement parts in
the transport position against risky position changes. Use the
transport locks intended for this.

Before road transport, lock the operating lever of the tractor's
three-point hydraulic system against the unintentional raising or
lowering of the mounted or towed implement.

Before road transport, check that the required transport equip-
ment, e.g., lighting, warning equipment and protective equip-
ment, is correctly installed on the implement.

Before road transport, perform a visual check that the top and
lower link pins are firmly fixed with the linch pin against uninten-
tional release.

Adjust your forward speed to the respective prevailing condi-
tions.

Before driving downhill, switch to a lower gear.

Before road transport, always switch off the independent wheel
braking (lock the pedals).

Observe the maximum permissible total weight.