Amazone Centaya 3000 Super 1600, Руководство по эксплуатации

Страница: 121 / 230

Coupling and uncoupling the implement
Centaya Super BAH0092-3 01.19
121
7.2.1 Coupling - Tractor and soil tillage implement
As a standard, the seeding combination is equipped with a working position sensor, which transmits
the pulses to switch the electric motor for the metering roller drive on and off.
The equipment of your seed drill with seed tube monitoring requires a second working position sensor.
This working position sensor supplies the pulse for switching the seed tube monitoring on and off.
The figure shows the arrangement of the working
position sensors.

the working position sensor (Fig. 125/1)
serves as pulse generator to switch the me-
tering roller motor on and off

the working position sensor (Fig. 125/2)
with adjustment magnet (Fig. 125/3) serves
to pulse generator to switch the seed tube
monitoring on and off.
Fig. 125
Couple the tractor and soil tillage implement as
follows:
1. Installation of the analogue working position
sensor and the working position sensor for
seed drills with seed tube monitoring (see
chapter 7.2.1.1, page 122).
2. Couple the soil tillage implement and the
tractor, see "Soil tillage implement" operat-
ing manual.
Fig. 126
3. Hook the tensioning element (Fig. 127/1)
onto the top link bracket (Fig. 127/2).
4. The working and transport position of the
combination must be calibrated after each
coupling of tractor and implement
(see Fig. 237, page 184).
Fig. 127