Amazone Catros 3001 Скачать руководство пользователя страница 67

Страница: 67 / 88

Transportation

Catros BAG0053.14 10.17

WARNING

Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power on improper use
of the tractor!

These risks pose serious injuries or death.

Comply with the maximum load of the connected machine and the
approved axle and support loads of the tractor. If necessary, drive
only with a partially-filled hopper.

WARNING

Risk of falling from the machine if riding against regulations!

It is forbidden to ride on the machine and/or climb the running ma-
chine.

9.1

Conversion from operational to transport position

Catros 3001 and 3501

DANGER

Risk of injury with overwidth transport.

Push in and lock the outer border discs / border tines!

The disc rows must each be locked in the
transport position by means of a ratchet on the
left and right of the machine.

1. Lower the machine.

2. Pull the tractor release cord.

3. With the machine lowered, reverse a little

on the field.

→

Move the disc rows to the transport position.

4. Let go of the release cord.

→

The disc rows lock in the transport position.

5. Check the locking of the disc rows.

Disc rows locked:

•

Fig. 47 - Right machine side, position A.

•

Fig. 48 - Left machine side

6. Raise the machine.

7. Clean the tools.

Fig. 48

Fig. 49

Содержание Catros 3001

























































































Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 3001, Руководство по эксплуатации

Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды