Amazone Catros 3001 Скачать руководство пользователя страница 32

Страница: 32 / 88

Product description

Catros BAG0053.14 10.17

4.5

Intended use

The machine

•

Has been designed for conventional soil tillage of agricultural
crop lands.

•

is coupled to the tractor using the three-point attachment and is
operated by an additional person.

Slopes can be travelled

•

Along the contours

Direction of travel to left 15 %

Direction of travel to right 15 %

•

Along the gradient

Up the slope

15 %

Up the slope

10 % ((6002-2, 6003-2)

Down the slope

15 %

The intended use also includes:

•

Compliance with all the instructions in this operating manual.

•

Execution of inspection and maintenance work.

•

Exclusive use of AMAZONE original spare parts.

Other uses to those specified above are forbidden and shall be con-
sidered as improper.

For any damage resulting from improper use:

•

the operator bears the sole responsibility,

•

AMAZONEN-WERKE assumes no liability whatsoever.

Содержание Catros 3001

























































































Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 3001, Руководство по эксплуатации

Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды