Amano BX-1600, Руководство по эксплуатации

Страница: 13 / 42

1-9
Wall Mounting
Caution
• For mounting the time recorder on the wall, use a fixture
suitable to wall material so that weight of this unit can be
securely held.
If not, the time recorder may fall, causing an injury.
Allow 3mm
between the
screw head and
wall.
Insert a screw into the wall.
Place one screw about 94cm (37”) to 124cm (48.8”) above the floor.
At this height the time recorder is easy to use.
1
Insert a second screw into the wall.
Place this screw 13cm to 13.5cm
immediately below the first screw.
2
Peel off the protective
paper.
3
Install the bracket into
the bell-bottom hole (a
hole, located lower than
the other hole on the rear
surface of the case).
4
Hook the unit on the screws
through the holes on the back
of the case.
5
Secure the bracket to the
wall with the lower screw.
6
Protective
Paper
Bracket
13~13.5cm
(5.12”~5.32”
)
Maximum 8mm (0.315”)
Maximum 2.9mm
(0.114”) 4.1mm (0.161”)
3mm (0.118”)
Actual size
12
3 9
6
12
3 9
6