Amano BX-1600 Скачать руководство пользователя страница 6

Страница: 6 / 42

ENGLISH

1-2

FOR THE OPERATIONAL SAFETY

Carefully read to fully appreciate the following warnings and cautions before

starting use of the equipment.

Warning

•

Do not use with any power voltage other than that indicated on

the product.

This could cause ﬁre or electric shock.

•

Do not overload power outlet.

This could cause ﬁre or electric shock.

•

Do not connect or disconnect power plug with wet hand.

This could cause electric shock.

•

Do not damage or break power cord.

If a heavy object is put on it, or the cord is pulled or bent forcibly, the cord may be

damaged and this could cause ﬁre or electric shock.

•

Do not remove any parts other than the lid.

There is high voltage part inside, and touching it could cause an electric shock.

•

Do not remodel the time recorder.

This may cause ﬁre or electric shock.

•

If any abnormality occurs such as smoke, smell or heat,

disconnect the power plug from the power outlet and contact

your dealer.

Continued use of the time recorder in the above cases could cause ﬁre or electric

shock.

•

If foreign matter (metal piece, water or other liquid) get inside

the time recorder, immediately disconnect the power plug from

the power outlet and contact your dealer.

Continued use of the time recorder in this case cause ﬁre or electric shock.

•

To avoid ﬁre hazard, use only a fuse of the correct type,

voltage rating, current rating as speciﬁed by the manufacturer:

Power source Fuse
110-120VAC

250V, 700mA

220-240VAC

250V, T500mA (Time Lag) with a low breaking capacity.

Use of any other materials for fuse will cause ﬁre.

Make sure that the fuse has the proper speciﬁed capacity prior to use.

•

When replacing the fuses, do not use fuses that exceed the

speciﬁed capacity or use wire and silver paper.

Use of any other materials for fuse will cause ﬁre.

Make sure that the fuse has the proper speciﬁed capacity prior to use.

Содержание BX-1600










































Результаты поиска

Содержание BX-1600

Отзывы:

Похожие инструкции для BX-1600

Бренды по названию

Популярные бренды

Amano BX-1600, Руководство по эксплуатации

Результаты поиска

Содержание BX-1600

Отзывы:

Похожие инструкции для BX-1600

Бренды по названию

Популярные бренды