Amano BX-1600, Руководство по эксплуатации

Страница: 17 / 42

1-13
Setting Imprint
Print formats are changed as follows :

Card Type
(with 6mm pitch)
Select from 1~7 the mode
which applies to the card
you use.
*with 7mm pitch (special
order), choose either “2” or
“4”.

Shifting Print position
manually
0 : Monthly pay surface
detection not operational
1 : Monthly pay surface
detection operational
2 : Upper step Weekly pay
(Bottom space : 23mm)
3 : Upper step Weekly pay
(Bottom space : 35mm)
4 : Lower step Weekly pay
(Bottom space : 23mm)
5 : Lower step Weekly pay
(Bottom space : 35mm)
6 : Bi-weekly pay
(Bottom space : 23mm)
7 : Bi-weekly pay
(Bottom space : 35mm)
1 : “Shifting print position manually” operational
2 : “Shifting print position manually” not operational
1 : “Shifting print position manually” operational
Both automatic shifting of print column with weekly program and manual
selection using column button can be used together.
When column button is pressed, the column position will be operational for
10 seconds. After printing is completed, or if no print is completed within 10
seconds after the column button is pressed, print position will return to the
column which has been set by weekly program.
If no weekly program is set, column button will be operational continuously.
2 : “Shifting print position manually” not operational
Print column shifts only by weekly program : Column position cannot be shifted
manually.
If weekly program has not been set, note that printing cannot be done even if the
card is inserted.
Upper step
Lower step
Bottom space
   