Amano A-VAC 12 07212A, Руководство оператора, Страница: 18 / 40

DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
Emptying the Collection Tank
To empty the collection tank of solid waste, proceed as follows:
1. Take the appliance to the designated place for emptying the collection tank.
2. Take the necessary steps to secure the machine (see the section
“MACHINE SAFETY” ).
WARNING: You are advised to always wear protective gloves, to avoid the risk of serious injury to your hands.
3. Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate the
levers as shown by the arrow in the picture on the right.
4. Use the handle (2) on the vacuum head unit to remove it from the collection tank.
5. Rest the head carefully on the ground.
6. Using the handle, rotate the collection tank until the handle is touching the ground.
7. Remove the dirt from the collection tank.
NOTICE: Remember to place the dirt collection container on the ground before emptying out the dirt.
8. Repeat the operations in reverse order to reassemble all the parts
WARNING : Dust produced from sanding wood or varnish could self ignite causing injury or damage. If this
material has been picked up, empty it immediately after use into a metal container. Never leave sanding dust
of any amount supervised.
18