Amano A-VAC 12 07212A, Руководство оператора, Страница: 13 / 40

Preparing the Machine
Before beginning to work, it is necessary to:
1. Before using, the appliance must be in order and safe to use with the work equipment, especially the power
cable and the extension cable. If everything is not in order, the appliance must not be used.
2. Take the necessary steps to secure the machine (see the section “ MACHINE SAFETY ’”).
3. Press the button (1) on the vacuum nozzle.
4. Insert the vacuum hose (2) in the hole (3) on the vacuum nozzle.
5. Select the most suitable accessory for the task to be carried out (see the section “
CHOOSING AND USING
THE ACCESSORIES ”).
6. Select the most suitable extension for the type of work to be carried out.
7. Insert the extension in the nozzle on the vacuum hose.
8. Connect the female part of the extension to the male part.
9. Insert the accessory.
WARNING: Never use the machine without the right filter for the type of work being carried out.
WARNING : Do not use an extension cord with the AVac12 or you will experience a loss in performance.
Should an extension cord be necessary, use one sized 12 AWG and no longer than 50 feet (15 meters)
in length. An extension cord sized smaller than 12 AWG or greater than 50 feet (15 meters) in length will
overheat and potentially cause a fire.
WARNING : This appliance must be grounded. Should an electrical malfunction occur, the grounding
conductors provide a path to harmful current. Do not connect this appliance to any other wall outlet than one
of those shown in figure 4. Consult an electrician if there is reason to doubt that the wall outlet is not wired
correctly. Do not remove the grounding pin on the power cord. Do not use this appliance with a damaged
power cord or plug.
13