Amano A-VAC 12 07212A, Руководство оператора, Страница: 14 / 40

14
Using the Machine - Dry
To start working, proceed as follows:
1. Perform all the checks indicated in the section “ PREPARING THE MACHINE ”.
2. Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate the
levers as shown by the arrow in the picture on the right.
3. Use the handle (2) on the vacuum head unit to remove it from the collection tank.
4. Rest the head carefully on the ground.
5. Remove the float unit from the collection tank and install the nylon filter bag around the top of the collection
tank.
WARNING: If you are using the paper filter/collection bag, see the section “ INSERTING THE FILTER/
COLLECTION BAG ”.
6. Place the float unit back into the collection tank, on top of the nylon filter bag to hold it in place.
7. Use the handle (2) on the vacuum head unit to position it above the collection tank. Make sure the machine’s
power supply cable is in the rear part of the tank.
8. Fix the vacuum head to the collection tank by coupling the hooks (1) on the side of the tank. Rotate the levers
as shown by the arrow in the picture on the right.
9. Insert the plug (3) of the power supply cable (4) in the electrical outlet
and/or power socket (5).
10. Switch on the machine by bringing the main switch (6) to the work
position “I”.
11. Carry out the cleaning work.
NOTICE: If the vacuuming intensity diminishes while you are
working, see the section “ IMPROVING THE VACUUMING
PERFORMANCE ”.
Nylon
Filter Bag