Amano A-VAC 12 07212A, Руководство оператора, Страница: 17 / 40

Post Operation
At the end of the work, and before carrying out any type of maintenance, perform the following operations:
1. Take the necessary steps to secure the machine (see the section “ MACHINE SAFETY ”).
2. Take the appliance to the designated place for emptying the collection tank.
3. Empty the collection tank (see the section “ EMPTYING THE COLLECTION TANK ”).
WARNING: The place this operation is carried out should comply with current environmental protection
regulations.
4. Remove the accessory from the extension. Clean it under running water and place it in the object-holder pocket.
5. Remove the female part of the extension from the male part. Clean it under running water and place it in the
object-holder pocket.
6. Remove the extension from the nozzle in the vacuum hose. Clean it under running water and place it in the
object-holder pocket.
7. Press the button (5) on the vacuum nozzle.
8. Remove the vacuum hose from the hole (6) on the vacuum nozzle. Clean it under running water and wind it
around the handlebar.
9. Take the machine to its designated storage place.
WARNING: Park the machine in an enclosed place, on a flat surface. There must be no objects nearby that
could either damage it, or be damaged through contact with it.
WARNING:To reduce the risk of fire, electric shock, or injury:
l
Do not use where explosive vapors, such as gas, solvents, alcohol, fuels, or combustible materials such
as grain, wood dust, are present in the air. Keep the work area well ventilated.
l
Dust produced from sanding wood or varnish could self ignite causing injury or damage. If this material
has been picked up, empty it immediately after use in a metal container.
l
Do not use to pick-up health endangering dust.
17