Amana ADVC8 Series, Брошюра и характеристики

Страница: 3 / 12

SS-AMVC8 www.amana-hac.com 3
2 www.amana-hac.com SS-AMVC8
p
roDuCT
S
peCiFiCATionS
p
roDuCT
S
peCiFiCATionS
S
peCiFiCATionS
AMVC8
0604B*B
AMVC8
0805C*B
AMVC8
1005C*B
ADVC8
0603B*B
ADVC8
0805C*B
ADVC8
1005C*B
Heating Capacity
High Fire Input (BTU/h)¹
60,000 80,000 100,000 60,000 80,000 100,000
High Fire Output (BTU/h)¹ (below)
Natuarl Gas 48,000 64,000 80,000 48,000 64,000 80,000
LP Gas 48,000 64,000 80,000 48,000 64,000 80,000
Low Fire Input (BTU/h)¹ 42,000 56,000 70,000 42,000 56,000 70,000
Low Fire Output (BTU/h)¹ (below)
Natuarl Gas 33,600 44,800 56,000 33,600 44,800 56,000
LP Gas 33,600 44,800 56,000 33,600 44,800 56,000
AFUE2 80 80 80 80 80 80
Available AC @ 0.5” ESP 1.5 - 4.0 2.0 - 5.0 2.0 - 5.0 1.5 - 3.0 2.0 - 5.0 2.0 - 5.0
Temperature Rise Range (° F) 20 - 50 20 - 50 25 - 55 30-60 35 - 65 35-65
Circulator Blower
Size (D x W)
10” x 8” 10” x 10” 10” x 10” 10” x 8” 10” x 10” 10” x 10”
Horsepower - RPM ¾ ¾ ¾ ¾ ¾ ¾
Speed Variable Variable Variable Variable Variable Variable
Vent Diameter² 4” 4” 4” 4” 4” 4”
No. of Burners 3 4 5 3 4 5
Disposable Filter Size (in²) 610 813 1,016 474 569 711
Electrical Data
Min. Circuit Ampacity³
12.1 12.1 12.1 12.1 12.1 12.1
Max. Overcurrent Device (amps)⁴ 15 15 15 15 15 15
Ship Weight (lbs) 152 178 194 155 177 193
1
Natural Gas BTU/h; for altitudes above from 0’ to 4,500’ above sea level, reduce input rating 4% for each 1,000’ above 4,500’ altitude. Low-fire rate is
75% of high-fire rate.
2
DOE AFUE based upon Isolated Combustion System (ICS)
3
Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical
Codes. Extensive wire runs will require larger wire sizes.
4
Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of
the same size as noted.
Notes
• All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
• Gas Service Connection ½” FPT
• Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all
existing local codes.