Amana ACES80 Скачать руководство пользователя

Страница: 17 / 58

PRODUCT DESIGN

Safety

Please adhere to the following warnings and cautions when

installing, adjusting, altering, servicing, or operating the

furnace.

O PREVENT PERSONAL INJURY OR DEATH DUE TO IMPROPER INSTALLATION,

ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE, REFER TO THIS
MANUAL.

OR ADDITIONAL ASSISTANCE OR INFORMATION, CONSULT A

QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER.

WARNING

HIS PRODUCT CONTAINS OR PRODUCES A CHEMICAL OR CHEMICALS WHICH

MAY CAUSE SERIOUS ILLNESS OR DEATH AND WHICH ARE KNOWN TO THE

TATE OF

ALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER

REPRODUCTIVE HARM.

WARNING

O PREVENT POSSIBLE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH

DUE TO ELECTRICAL SHOCK, THE FURNACE MUST BE LOCATED TO PROTECT
THE ELECTRICAL COMPONENTS FROM WATER.

Charge (ESD) Precautions
NOTE:

Discharge body’s static electricity before touching

unit. An electrostatic discharge can adversely affect electrical

components.
Use the following precautions during furnace installation

and servicing to protect the integrated control module from

damage. By putting the furnace, the control, and the person

at the same electrostatic potential, these steps will help

avoid exposing the integrated control module to electrostatic

discharge. This procedure is applicable to both installed and

uninstalled (ungrounded) furnaces.
1. Disconnect all power to the furnace. Do not touch the

integrated control module or any wire connected to the

control prior to discharging your body’s electrostatic

charge to ground.

2. Firmly touch a clean, unpainted, metal surface of the

furnace near the control. Any tools held in a person’s

hand during grounding will be discharged.

3. Service integrated control module or connecting wiring

following the discharge process in Step 2. Use caution

not to recharge your body with static electricity; (i.e., do

not move or shuffle your feet, do not touch ungrounded

objects, etc.). If you come in contact with an ungrounded

object, repeat Step 2 before touching control or wires.

4. Discharge any static electricity from your body to ground

before removing a new control from its container. Follow

Steps 1 through 3 if installing the control on a furnace.

Return any old or new controls to their containers before

touching any ungrounded object.

Product Application

This product is designed for use as a residential home gas

furnace. It is

not

designed or certified for use in mobile home,

trailer, or recreational vehicle applications.

This furnace can be used in the following non-industrial commercial

applications:

Schools, Office buildings, Churches, Retail stores,

Nursing homes, Hotels/motels, Common or office areas.

In such

applications, the furnace must be installed with the

installation

instructions.
Goodman & Amana

80% furnaces are ETL certified appli

ances and are appropriate for use with natural or propane

gas. (

NOTE:

If using propane gas, a propane conversion

kit is required).

IMPORTANT NOTE: The 80% furnace cannot be installed

as a direct vent (i.e.., sealed combustion) furnace. The

burner box is present only to help reduce sound trans-

mission from the burners to the occupied space.

To ensure proper installation, operation and servicing, thor-

oughly read the installation and service manuals for specifics

pertaining to the installation, servicing and application of

this product.

WARNING

OSSIBLE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH DUE TO FIRE,

EXPLOSION, SMOKE, SOOT, CONDENSTAION, ELECTRICAL SHOCK OR CARBON
MONOXIDE MAY RESULT FROM IMPROPER INSTALLATION, REPAIR, OPERATION,
OR MAINTENANCE OF THIS PRODUCT.

WARNING

O PREVENT PROPERTY DAMAGE, PERSONAL INJURY OR DEATH DUE TO FIRE,

DO NOT INSTALL THIS FURNACE IN A MOBILE HOME, TRAILER, OR RECREATIONAL
VEHICLE.

To ensure proper furnace operation, install, operate, maintain

and service the furnace in accordance with the installation,

operation and service instructions, all local building codes

and ordinances. In their absence, follow the latest edition of

the National Fuel Gas Code (NFPA 54/ANSI Z223.1), and/or

CAN/CGA B149 Installation Codes, local plumbing or waste

water codes, and other applicable codes.
The rated heating capacity of

the furnace should be greater

than or equal to the total heat loss of the area to be heated.

The total heat loss should be calculated by an approved

method or in accordance with “ASHRAE Guide” or “Manual

J-Load Calculations” published by the Air Conditioning Con

tractors of America.

Содержание ACES80



























































Результаты поиска

Содержание ACES80

Отзывы:

Похожие инструкции для ACES80

Бренды по названию

Популярные бренды

Amana ACES80, Инструкция по эксплуатации

Результаты поиска

Содержание ACES80

Отзывы:

Похожие инструкции для ACES80

Бренды по названию

Популярные бренды