Ama Systems AMA EASY R5.01, Руководство пользователя

Страница: 16 / 32

SMS MESSAGES SENDING AND RECEIVING
The PDST LED will blink 3 times as soon as the AMA EASY receives the message.
After about 45 seconds the PDST LED will power on and off twice, followed by a steady burning during 5
seconds to indicate the message has been sent. If not, please check your
SMS, SIM-card or password and try again. The SMS-counter is programmed on 3 SMS text messages and
will RESET each time the ignition key (+15) is turned ON, f.e. the AMA EASY send maximum 3 x MOVING
ALARM with the ignition key in the OFF position.
2.1. WHICH CELL PHONE WILL RECEIVE THE SMS MESSAGE?
After receiving the GSM-network signal, please program your cell phone number in the AMA EASY.
The cell phone number of the user is f.e.:
0123/456789
Send the following message to the AMA EASY: A1111+xx123456789 .
A = stands for ALARM
1111 = stands for default password
+xx = stands for the international dialing code
123456789 = stands for the cell phone number of the receiver
Do not enter any spaces before or in your message. After about 45 seconds the AMA EASY will send an
SMS message to the input dialing numbers to confirm:
AMA EASY R5.01
PW= 1111
TEL=+xx123456789
2.2. PERSONAL PASSWORD
Desired personal password f.e.: 1234
Send the following message to the AMA EASY (this could be digits or caracters) : P11111234
P = stands for PASSWORD
1111 = stands for default password
1234 = stands for a new password
Do not enter any spaces before or in your message. After about 45 seconds the AMA EASY will send a SMS
message to the input dialing numbers to confirm:
AMA EASY R5.01
PW= 1234
TEL=+xx123456789
2.3. FUNCTION 1: LINE TEST (for AMA EASY counts only function 1 and 3)
If activated, the AMA EASY will generate a line test according to the programmed time interval.
Send the following message to the AMA EASY:
Fxxxx1=z
F = stands for FUNCTION
xxxx = stands for the password
1 = stands for the function type
z = stands for the line test status
( 0 = switched off (default value), 1 = every day, 2 = every week, 3 = every month).
Do not enter any spaces before or in your message. After about 45 seconds the AMA EASY will send a SMS
message to confirm:
AMA EASY R5.01
PROG=1,0,7,0,0 (function 1 and 3)