11
5.
Insert the metal frame [10] into the
basket [9] and attach all the clips to the
left, right and rear side of the frame bar.
Make sure that all clips are properly
secured (Fig. 6).
6.
Assembly of the completed basket on
the scarifier (Fig. 7).
a.
Lift the protective cover [11].
b.
Make sure that the discharge
stack is clean and free of dirt.
c.
Place the basket on the rear
mounting points of the
undercarriage as shown.
d.
Place the
protective cover [11] on
top of the basket. Check that the
basket is mounted correctly.
NOTE: If you wish not to harvest the cut grass, the scarifier can be used
without the basket with the protective cover [11].
