16
13
Scarification / Aeration
●
For comfortable work with the machine, it is best to start working closest to the
power supply and then be slowly moving away from the power supply.
●
Aerate the lawn at a
right angle to the power supply and place the power cord on the
side that has already been treated.
●
ATTENTION!
Do not subject the engine to excessive stress when working, especially
in difficult conditions. If the engine is stressed, the engine speed will
drop and you
will hear a change in engine sound. When this happens, stop working, release the
switch lever and reduce the scarification / aeration depth. Failure to do so could
damage the machine.
NOTE:
The motor is protected by a safety fuse that activates when the leaves are
seized or when the motor is overloaded. When this happens, turn off the machine
and remove it from the power supply. The safety lock will reset only if the switch
lever is released. Remove any obstacles and wait a few minutes for the safety lock to
reset so that you can continue working. Do not operate the switch lever at this time,
as this increases the reset time of the safety fuse. If the machine shuts down again,
increase the scarification / aeration depth again to reduce the engine load.
14
Specifications
Voltage
230-
240 V ~/50 Hz
Power consumption
1800 W
No-load speed (rpm)
35
00 min
-1
Grip width
400 mm
Basket volume
55 l
Weight
12,8 kg
Working depth
-
12 to 6 mm
Protection class/ level
Class/ Level II
Degree of protection
IPX4
Measured level of sound pressure at the
operating location
L
PA
= 85,56 dB (A);
K = 3 dB (A)
Guaranteed sound power level
Max. L
WA
104 dB (A)
Handle vibration
5,508 m/s
2
;
K = 1,5m/s
2
Specifications are subject to change without notice.
