10
6
Machine Assembly
1.
Slide the cable secured hook [1] onto the lower part of the handle [2] (Fig. 2).
2.
Slide the lower part of the handle [2] into the rotary unit [3]. Then screw the quick
-
release lever [4] onto the machine body from the outside (Fig. 3).
3.
Insert the two locking
screws [8] from the
inside through the hole
in the lower handle [2]
and secure them to the
middle handle [6] with
two wing nuts [5] (Fig.
4).
4.
Insert the two locking
screws [8] from the
inside through the hole
in the upper handle [7]
and secure them to the
middle handle [6] with
two wing nuts [5] (Fig.
4).
