Always On GES-1003NX, Руководство оператора, Страница: 47 / 66

Always
O
n UPS Systems
M0703_NX_Series_Operators_Manual V1.25 2012-06-12 41
Listed below are all the fault conditions that can be displayed:
1
st
row:
HIGH DC SHUTDOWN
– DC Bus voltage out of operating range.
2
nd
row:
SHORT CIRCUIT!
– a short circuit condition has occurred on the output.
FUSE/OVERHEAT –
a fuse has blown or the system has shutdown due to
overheating.
OVERLOAD SHUTDOWN
– system has exceeded the overload limit beyond the
operating window.
EMERGENCY STOP –
user has activated the emergency stop feature.
INVERTER ABNORMAL –
inverter is not operating within specified parameters.
3
rd
row:
BYPASS ON SHUTDOWN
– inverter failure, system operating in bypass mode.
The UP ( ) or DOWN ( ) key has no function in this menu. The screen will go back to MENU
1, when ENTER( ) is pressed.
9.4 Menu 3 – Real Time Data Menu
MENU 3 is reached by selecting REAL TIME DATA on MENU 1. The cursor( → ) is used to select
what type of real time data the user would like to view, RECTIFIER DATA (MENU 6 – Section
10.7), RESERVE DATA (MENU 7 – Section 10.8), OUTPUT DATA (MENU 8 – Section 10.9) and
OTHER DATA (MENU 9 – Section 10.10). To select one of the different menu options move the
cursor(
→
) until it is pointing at the correct selection, by press the UP (
↑
) key or the DOWN (
↓
) key.
To confirm and select the menu option press the ENTER (
↵
) key.
Selecting the ‘EXIT’ option (blinking instead of pointed by cursor) will return you to MENU 1.
R E A L T I M E D A T A
R E C T I F I E R D A T A O T H E R D A T A
R E S E R V E D A T A
O U T P U T D A T A E X I T
Figure 9.4.1
Real Time Data Menu Display