Always
O
n UPS Systems
M0703_NX_Series_Operators_Manual
V1.25
2012-06-12 39
9.2
Menu 1 – Select Menu
MENU 1 is reached by pressing any button on the opening screen and is also the default menu.
From this menu the personnel can select STATUS WARNING FAULT (MENU 2 – Section 10.3),
REAL TIME DATA (MENU 3 – Section 10.4), HISTORICAL DATA (MENU 4 – Section 10.5) and
PARAMETER SET (MENU 5 – Section 10.6). To select an option move the cursor (
→
) by pressing
the UP (
↑
) key, or the DOWN(
↓
) key. Selections are confirmed by pressing the ENTER (
↵
) key.
The user will be sent to the menu the cursor is pointing to. If the item ‘PARAMETER SET’ is
selected, the LCD will jump into a screen that will prompt the user for a password. See the figure
below.
The numbers are changed by pressing the UP (
↑
) or the DOWN(
↓
) key respectively and is
confirmed by the ENTER(
↵
) key. When the four-digit password has been entered successfully
you will proceed to the selected area. If the password has been entered incorrectly three times
the display will revert to the default menu (MENU 0).
The password for entering the < PARAMETER SET > menu is 1-2-3-4. To change the
password, please review MENU 12 (Section 10.13).
To return to MENU 0 select the ‘EXIT’ option (blinking instead of pointed by cursor).
S E L E C T M E N U
S T A T U S
W A R N I N G
F A U L T
P A R A M E T E R
S E T
R E A L T I M E D A T A
H I S T O R I C A L D A T A
E X I T
P A S S W O R D : 1 2 3 4
Figure 9.2.1
Select Menu Display
Figure 9.2.1
Password Menu Display