Always
O
n UPS Systems
M1306_GES-242NX-R Operators and Install Manual V1.0 2012-06-12
2
2. IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
This manual contains important safety instructions that should be followed during installation and
maintenance of the N Series DC UPS system and optional packages. Before the installation
process begins, we recommend that the installer read through the safety precautions, operators
manual and the option installation instructions, taking all necessary safety precautions to protect
themselves and the equipment being installed.
GENERAL
-
Move the DC UPS in an upright position, in its original packaging, to its final destination.
To lift the cabinets, use a forklift or lifting belts with spreader bars.
-
Check for sufficient floor and elevator loading capacity.
-
Check the integrity of the DC UPS equipment carefully.
If visible damage is evident,
do not
attempt to install or start the DC UPS. Contact the transport
delivery company immediately, file a claim with the transport company and inform Always
O
n
directly.
-
Do not use outdoors
- The use of accessory equipment not recommended by Always
O
n may cause an unsafe
condition
- WARNING!
RISK OF ELECTRICAL SHOC
K: use extreme caution when removing covers.
- All maintenance and service work should be performed by qualified and trained service
personnel. The DC UPS may contain its own energy source, (batteries) which can be
dangerous to the untrained person. This DC UPS contains potentially hazardous voltages
-
The field-wiring terminals may be electrically live, even when the DC UPS is not connected to
the utility.
-
Use caution when servicing batteries. A battery can present a risk of electrical shock, burn from
high short-current. Battery acid can cause burns to skin and eyes. If acid is spilled on skin or in
eyes, flush with fresh water and contact physician immediately.
-
When replacing batteries use the same number and type (sealed-cell lead acid).
-
Proper disposal of batteries is required. Refer to your local codes for disposal requirements.
- Dangerous voltages may be present during battery operation. The batteries must be
disconnected during maintenance or service work. (Open battery breaker of fuses)
-
Be aware that the inverter can restart automatically after the utility voltage is restored.
-
Do not use this equipment for other than intended use.
