Step 18.
Install the Carbon Fiber Gyro Mount to the Lensman
using Two M3x8mm Screws with M3 Self-Lock
Nuts.
Step 19.
Prepare your Streak 800, remove the System
Platform Frame from the main body.
Step 20.
Remove the Up Gimbal Mounting Frame from
Streak 800 to get ready to connect with Lensman-
18 Gimbal.
Step 21.
Insert 4pcs M3x18mm Hex Cap Screws(included
with Lensman) into the main frame of Streak 800
as shown above.
Step 22.
Insert 4pcs 3.5x7x9mm Nylon Rods into the
M3x18mm Screws used in previous step.
Step 23.
Insert 4pcs M3x18mm Hex Cap Screw with Nylon
Rod installed(step 22) into the Gimbal Mount
installed with Pan Main Gear.
9
