3. Installation to Streak 800
Assembly Steps:
Step 1.
Get ready with your Streak 800 Heacopter to install
with Lensman-18A professional gimbal.
Step 2.
Remove the original Laning Gear from your Streak
800 by removing three screws on each side.
Step 3.
Repeat step 2 to remove other side of Landing
Gear.
Step 4.
Install three screws back to the main frame of
Streak 800.
(Apply little amount of Thread Locker
when assembly metal to metal parts.)
Step 6.
Landing Gear Frames removed from Streak 800.
Step 7.
Remove the LG Metal Mount and Bipod Landing
Gear Assembly from the Landing Gear Frame as to
use on Lensman-18 Gimbal.
6
