SP4R Trim Installation Guide
SP4R Trim Installation Guide
8 of 12
102-000022 - IG011619-A.0
SHOCK HAZARD! May result in serious injury or
death.
Turn power OFF at circuit breaker prior to
installation or servicing.
!
DO NOT PINCH OR PUT EXCESSIVE TENSION ON
WIRES
while joining sections or reattaching end
caps.
Installation: Joining Mitered Corners
12
Join miter sections
13
Connect brackets
Slide miter sections together and join section connectors.
Adjust connectors with set screws as necessary.
Screw connector brackets on top and sides with provid-
ed 8-32 screws avoiding any gaps between fixtures. See
steps 5 - 7 to install emitter at joint.
11
Connect wiring
Connect wiring quick connects between fixtrue sections.
14
A
Insert diffuser shim
Bend provided diffuser shim and insert it into the grooves
in side walls of extrusion covering LEDs extending into
miter joint.
14
B
Insert diffuser shim
