SP4R Trim Installation Guide
SP4R Trim Installation Guide
10 of 12
102-000022 - IG011619-A.0
15
Bring lens to fixture
16
A
Insert ControlRoll lens into lens channel
16
B
Insert ControlRoll lens into lens channel
Raise ControlRoll
TM
lens to fixture. For longer fixture lengths,
two people may be needed.
Always wear protective
eyewear while handling lens.
Insert one edge ControlRoll lens into lens channel.
17
A
Press lens into lens channel
17
B
Press lens into lens channel
18
Snap lens along fixture
With first edge of lens in lens channel, press other side
of lens up toward opposite channel. It may be easier to
begin installing lens 2 or more inches from end of fixture.
Once inserted, lens can be slid to meet end cap.
Push lens upward until it snaps into second lens channel.
Continue pressing both sides of lens into lens channel until
lens is fully installed along length of fixture. Press lens into
channel at offset positions as shown to limit stress on lens.
Installation: ControlRoll
TM
Lens