SP4R Trim Installation Guide
SP4R Trim Installation Guide
6 of 12
102-000022 - IG011619-A.0
If joining straight sections,
continue with steps 8-10.
If joining miter sections,
continue with steps 11-14.
If installing single-section
fixtures, go to step 15.
Re-install emitter by snapping emitter arms to main extru
-
sion.
Do not pinch wires.
6
Install end emitter
Connect wiring quick connects between fixture and
emitter assembly.
5
Connect emitter wiring
Installation: Installing Emitter
7
A
Secure end emitter
7
B
Secure end emitter
Secure end emitter assembly to fixture using #6 screws
(4X).
