Alvarion BreezeACCESS SU-A-EZ, Руководство по эксплуатации продукта

Страница: 126 / 165

Chapter 5 - Command Line Interface Wireless Commands
BreezeACCESS SU-A-EZ 109 Product Manual
5.10.1 set ClientSta authentication
This command defines the 802.11 authentication type allowed by the SU-A-EZ.
Syntax
set ClientSta authentication < OpenSystem | SharedKey >
• OpenSystem - Can associate to an AU without verifying its identity using a shared key.
“Open” authentication means either there is no encryption (if encryption is disabled) or
WEP-only encryption is used (if encryption is enabled).
• SharedKey - Authentication is based on a shared key that has been distributed to all
stations.
Default Setting
OpenSystem
Command Mode
Installer, Admin
Example
5.10.2 set ClientSta security-mode
This command defines the encryption algorithm employed when enabling the
data-encryption-option. You can choose either Advanced Encryption Standard in
Counter with CBC-MAC mode (AES-CCM) or Wired Equivalent Privacy (WEP).
Syntax
set ClientSta security-mode < AES-CCM | WEP >
• AES-CCM - Selects the Advanced Encryption Standard in Counter with CBC-MAC mode
standard
• WEP - Selects.Wired Equivalent Privacy standard
get BSSList Shows the wireless APs available in the neighborhood. Installer;
Admin
116
set CStatus
clear-cnt yes Sets all Rx/Tx display statistics to a null value. Installer,
Admin
117
get CStatus Shows the status for the wireless interface. Installer,
Admin
117
Installer# set ClientSta authentication SharedKey
Installer#
Table 5-8: Wireless Commands
Command Function Mode Page