Alvarion BreezeACCESS SU-A-EZ, Руководство по эксплуатации продукта

Страница: 101 / 165

Chapter 5 - Command Line Interface Regulatory Domain Commands
BreezeACCESS SU-A-EZ 84 Product Manual
5.5 Regulatory Domain Commands
Before transmitting wireless data from the unit, you should determine the correct
regulatory domain setting for the country in which you are operating the SU-A-EZ.
The selected regulatory domain must comply with applicable local radio
regulations.
5.5.1 regdomain
This command allows you to set the regulatory domain in which the SU-A-EZ will
be used. After selecting the required domain, the unit must be rebooted for
changes to take effect.
Syntax
regdomain < FCC | ETSI | UK | JAPAN | Universal | WLG | India | Brazil >
• FCC - Federal Communications Commission.
• ETSI - European Telecommunications Standards Institute.
• UK - United Kingdom.
• JAPAN - Japan (Disabled in this version).
• Universal - For a testing environment only. Do not select for wireless transmission of
data outside of a test environment. This selects all frequencies in the 802.11a
bandwidth.
• WLG - White Logo: may be customized to a domain other than those stated above.
Access restricted.
Table 5-3: Regulatory Domain Commands
Command Function Mode Page
regdomain Allows you to select what regional domain to set. Installer
84
addfreq Adds one or more individual frequencies or a range of frequencies
within the band allowed by the chosen regulatory domain. Installer;
Admin
85
dynamicfreq Configures one or more frequencies or a range of frequencies
within the band allowed by the chosen regulatory domain (old
setting are overwriten). Installer,
Admin
86
delfreq Deletes one or more individual frequencies or a range
of frequencies.
Installer;
Admin
87
getfreq Displays the currently used frequencies. Installer;
Admin
87
WARNING
It is the responsibility of the wireless system operator to verify that use of the selected regulatory
domain does not result in violation of the relevant local radio regulations!