Alvarion BreezeACCESS SU-A-EZ, Руководство по эксплуатации продукта

Страница: 54 / 165

Chapter 3 - Initial Configuration Configuring Basic Parameters
BreezeACCESS SU-A-EZ 37 Product Manual
Figure 3-2: The SU-A-EZ Management Interface
3.3.2 Basic Parameters
There are only a few basic steps you need to set up the SU-A-EZ and provide a
connection to your service provider’s Access Unit.
Follow these steps:
1
Set a New Password – On the Wireless Client Setting page, enter a new
password to replace the default “private”.
2
Set the ESSID (Extended Service Set Identifier) – Enter the ESSID, or wireless
network name, of the network you want to connect to. All SU-A-EZs in the
same network must use the same ESSID as the remote access point to
NOTE
It is strongly recommended that you configure your own password. If a password is not configured,
the management interface is not protected and anyone that can connect to the SU-A-EZ may be
able to compromise your network security.