Alvarion BreezeACCESS SU-A-EZ, Руководство по эксплуатации продукта

Страница: 104 / 165

Chapter 5 - Command Line Interface Regulatory Domain Commands
BreezeACCESS SU-A-EZ 87 Product Manual
5.5.4 delfreq
This command allows you to delete one or more individual frequencies and/or
ranges of frequencies within a band allowed by the chosen regulatory domain.
Syntax
delfreq < f1 | f2 | f3-f4 >
• f1, f2 - Specify the frequencies you wish to remove within a band allowed by the chosen
regulatory domain, in MHz, i.e. for the frequency 5.5GHz type 5500
• f3-f4 - A frequency range may be entered by separating two frequencies with a “-”, for
example type ‘5500-5560’, to select the range from 5.5GHz to 5.56GHz.
Default Setting
None
Command Mode
Installer, Admin
Example
In this example the frequency 5.500GHz is deleted from the frequency range.
5.5.5 getfreq
This command allows you to display the available frequencies that the unit is
using.
Syntax
getfreq
Default Setting
None
Command Mode
Installer, Admin
Example 1
This example shows how to display all selected frequencies in the regulatory
domain ETSI:
Example 2
This example shows how to use the addfreq command to add a frequency, the
delfreq command to remove another frequency, and the getfreq command to
display the updated list of frequencies:
Installer# delfreq 5500
Installer#
Installer# getfreq
5300,5700-5735
Installer#