Alvarion BreezeACCESS EZ AU-EZ, Системное руководство

Страница: 38 / 175

Chapter 2 - Installation Installing the Outdoor Unit
BreezeACCESS EZ AU-EZ 19 System Manual
Figure 2-2 illustrates the method of mounting an outdoor unit on a pole, using
the clamps and threaded rods.
2.3.2 Protecting ODU Connections
Use appropriate sealing material to protect the connection against moisture and
humidity. Use removable sealing material, such as a tar seal, to enable future
access to the connector.
Loop & tie the cable near the unit for strain relief and for routing water away from
the unit: use additional cable strips to route the cable such that water can
accumulate on the cable bends, away from the unit.
Figure 2-2: Pole Installation Using Special Clamps
NOTE
There is a groove on one end of the threaded rod. Be sure to insert the threaded rods with the
grooves pointing outward, as these grooves enable you to use a screwdriver to fasten the rods to
the unit.
NOTE
Use high quality sealing material such as Scotch
®
130C Linerless Rubber Splicing Tape from 3M to
ensure IP-67 compliant protection against dust and water.